Smart Universal Charger for Nimh battery Pack (2.4V - 7.2V) |  | Brand: Tenergy
Category: Sports
This item is no longer available
Sales Rank: 64,778
Media: Misc.
MPN: UPC810
Model: UPC810
UPC: 844949001038
EAN: 0844949001038
| |
| Features:
| • | Best Charger for charging all RC Car, RC air and Airsoft battery packs 2.4V, 3.6V, 4.8V, 6.0V and 7.2V | | • | Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours | | • | Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life | | • | Worldwide usage with 120-240V AC. Safety protection fuse for over current, short circuit & reverse polarity protection. | | • | Universal for for any NiMH /NiCd battery packs 2.4V - 7.2V (2-6 Cells pack) |
| |
| Editorial Reviews:
Product Description
Accessories Included
* 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
* 1 connector adaptor from standard Male Tamiya to Mini Female.
* 1 set of clip adaptor with Male Tamiya connector on one end.
* 2 additional fuses
Operation Instruction
* Connect battery pack to output connector and plug AC power source.
* Make sure battery polarity is connected correctly (Red wire is positive)
* Charger will detect battery voltage automatically, Red LED will be on during charging
* When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
* Battery will be charged at 0.9A or 1.8A constant current,
* Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
* The charger is designed for faster charging NiCd and NiMH battery packs from 2.4V to 7.2V for RC car/Air and Air soft gun.
* Don't charge battery pack with voltage less than 2.4V or Voltage bigger than 7.2V and capacity smaller than1100mAh.
* Battery pack must be made with high drain current cells.
* Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by misusage.
Caution
* The charger is designed for indoor use only. Don't leave the charger unattended during charging.
* The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods.
* Don't cover the charger when charging, ambient temperature shall not be more than 40oC
* Don't touch the plug.
* Don't leave the batteries and charger on wood surface or carpet.
* Cut off the power supply before connect or disconnect the charger with batteries.
* Don't try to disassemble the charger, High voltage inside, danger!
|
|
Federal Law mandates that all airsoft guns are sold with a 1/3" orange tip. It is illegal to remove this orange tip,
and this removal will void any warranty. In order to purchase any airsoft gun you must be 18 years or older.
Please act responsibly with your airsoft gun.
|
|
|
|
|
|
